Zeige alle Beiträge eines Teilnehmers
Hello Nilser,
I think your problem is the slow fade out of display. That is indeed a problem in connector P104/P105.
The 3V AC for that display goes through 4 connectors, first through the filter board, then through the profitsetter to the filter board to go to the display. The most reliable way to solve this problem is to cut the yellow and yellow-red wires at connector P104 and connect them t
von - by
Piet Ooms
-
Alles rund um Musikboxen
Jurgen,
The selector is fixed with 4screws, that's correct. When the seletor was removed for service and cleaning, than you must fix the selector in the same holes !
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hi Texel,
It's look that you have fixed the selector in a wrong position.
groetjes Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello,
Sometimes you can have this problem when on the gripperhousing the "arret" or "stop" is broken. That pin prevent that the gripperarm is turning to far and the gears are going into a bad position. The attachment make this more clear.
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hi Sean,
When the magazine stops before the home position,check if the playrelay is energized. If yes,then i think that the problem is a bad contact on the latching relay (K301- power interface board)
Regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello,
Is the 28V. still OK with the free play switch on? I think that the rectifier and/or the capacitor is gone.
The attachment make soms things clear.
Many regards
Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Guenter,
For free play, on the profit setter switschbank "D" switch 1,2and3 on.
Regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hi Marco,
The usual problem is an open coil.
The values are OK
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Marco,
I found this in archive,maybe it can help you,
Fragen Rock-Ola im Archiv von Jukebox-World
Problem:
Nach der Wahl und dem korrekten Abspielen des Liedes, schaltet die Box nicht ab. Erst nach dem Drücken der Clear Taste am Logic Board wird die Single weggelegt. Für ein Lied funktioniert es dann, dann wieder nicht.
Die Tonarm-Endabschaltung an sich und die Reject-Taste in Ve
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Matthias,
In the past i have repaired this with original parts, verry easy ! But (i hope) there must be a easy way to find an alternative. In my opinion is there notthing wrong with the resistors but with the capacitor (150pf).
Please cut off point 6 and set a new 150pf between point 5 and 6 on the backside.
Good luck.
Many regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Matthias,
If your 470 makes a crispering sound (even in stand-by mode) than it is most likely that you have a problem in one driverboard. if you changing left and right board and the problem is also changed ,i think that PEC4 is bad.
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Chrissi,
What happens when you disconnect the white-brown wire that's comming from the selector unit?
- the magazine motor is still turning, than there's a bad capacitor on the playrelay.
- the magazine motor stops ,there's a problem in the selector (be sure that all selectionpins are set off !!)
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Roger,
I'll be happy for you that your juke box is playing normal again. Also sorry that i'm answer in another language but that's for me the only way to expres me.Even english is for me difficult as you can read sometimes. Therefore, i can read german and there's no need that you answer in english.
Thank you also for the nice words but there are more (and better) sp
von - by
Piet Ooms
-
Alles rund um Musikboxen
Roger,
In the power distribution you will find the play (or start)relay.
Parallel on the contacts of that relay there's a .05MFD capacitor. This can also the raison for your problem.
Disconnect or check with a ohm meter.
Regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Roger,
Can you disconnect the plug unther the scan control? (3pins connector)
von - by
Piet Ooms
-
Alles rund um Musikboxen
Roger,
If the micro switch (1) is free, and the scanswitch is in "operation" position, the mechanism gets no power from the playrelay and is no longer searching for a record. Please check this first.
Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Roger,
The problem must be in the scan controle unit. see attachment.
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Bira,
I forgot one thing, on the bottom of your juke box,there's a big connector between the keyboard and the selection mechanisme. Parallel on that connector there's a small 3pins connector (for digit's 6,7 and 8)
Also a point to check.
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Bira,
Unther the push buttons, left, there are 8 slide switches to set the price standart or album play.
If there are switches moved to the middle position (no standart or album play),that row of selections is out of order. I think this can help you.
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello,
The 3 resistors in the creditunit are set parallel on the 3 creditcoils to protect the coinswitches. They eliminate the inductive voltage; in later models they have used diodes for tesame reason.
regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello Klaus,
Thank you for this respons.This can help other people who have problems with wobble plate coils.
Kind regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen
Hello,
For this problem please check the driverboard connectors (P10) for bad or broken contacts on the solderingside of the board.
Many regards Piet
von - by
Piet Ooms
-
Alles rund um Musikboxen