Zeige alle Beiträge eines Teilnehmers
Ergebnisse 91 - 120 / 274
Hi
The record display and credit display are blank on this machine hence selections cant be made, fuses all ok, checked connections nothing suspect found, rechecked 9.6 volts with pink wire and ground, I swapped over the logic board with a known working logic board and still the same problem. So it has to be the profit setter, has anyone had any success repairing these type of boards, the 9.6 vo
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Got it sorted out, just needed some lubrication. I can't get any sound from the amplifier and one of the thermic lamps is lighting up indicating an overload. Could it be that the output transistors on the heatsink need to be replaced or has anuone come across this type of problem
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Have one of these machines and there is a problem with the gripper arm, when selection is made , basket stops at correct selection but the gripper arm does not grip the record fully and as a result the record is not gripped by the arm. Is there some particular problem that might cause this or is it just a case of lubricating the mechanism at the various joints and linkages
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Does anyone have any idea where to look to resolve the problem with the repeating selection on the Bergmann S80 jukebox, its probably a model that is more common in mainland Europe. I understand that this machine was originally got in Germany and shipped back to Ireland
thanks
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I have experience with rockola, Wurlitzer and rowe ami jukeboxes, the Bergmann jukebox is the first one I have come across. I have never actually seen one before. The machine was working and selecting ok. After transport and I switched the machine on, the carriage scanned to the left to D twenty the last b side selection, it played put the record back and keeps repeating this selection. The s
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Thanks for the information I think thr relay was changed and resoldered so if you or any member had photos of a similar lyric I could compare the wiring and connections
Seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
have had this machine a few days now can't seem to figure it out. I have experience with rockolas, wurlitzers with the horizontal turntables and rowe ami. This is the first wurlitzer i have got with the vertical turntable. The machine is a bit dirty but it powers up and fuses are fine and the selection section seems to work although i will get back to this. The problem is that the record
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Does anyone know how external speakers can be connected to a rockola 464, regarding the terminal plate behind the chassis there are five terminals marked left and right channel and numbered 1 to 5, the existing internal speakers are connected to terminal 4. There are also the 70volt line terminals which i dont intend to use. I just wish to add two regular 8 ohm speakers, if i add them to the
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I have a selection problem with this machine.The machine selects ok for selections ending in 0,1,2,3,4.
For selections ending in 5 the its a bit hit and miss sometimes the selection will be ok other times it will select the next record on(for example- if i select 155 it will select 165)., note the digital display is displaying 155
If i make any higher selections for those ending in 6 and 7,
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Just an update on this, when i turn on machine relay MO operates, relay FA will operate if i press scan button, i measured voltages on the carriage board and i am getting approx 40 volts ac for both motors, the play motor operates but the scan motor will not. If i manually move the carriage the trip relay will operate at the selected slot
I haven't come accross many nsm jukeboxes whereb
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I have this machine and it has the following problem, it will not scan or select a record. The song number can be inputed but the carriage does not scanor it will not scan using the scan button on the control centre. When it is pressed the relay operates and the motor for the turntable operates but the motor below will not operate. I have checked all connections, all indicator led's are
von - by
seancalla
-
Alles rund um Musikboxen
Hi Just an update on the above in case someone else comes across it, a connection between the 22R resistor in the centre of the control board was broken, fixing it back together allowed the record to be played, as for the homing position maybe the nsm satellite does not home on the far right, as there is no issue with the carriage stopping at the various selections
regards
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I have one of these jukeboxes which has the following problem, carriage does not stop in home position at right side of of record basket, from other nsm's i have had this would be the home position when machine is switched on or after the last record is played. The machine is not showing any error codes. It accepts a selection and the display shows the various records slot numbers as it
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Just making another request for the above information if someone could help
regards
Seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I am looking for a photo of a rockola power supply from the early sixties with the Jones connections in particular the the wire colours and pinout at the low voltage connection point which is a 12 pin one. The reason i need it is that i am having difficulty locating a power supply with Jones connections for a rockola 414 so i want to see if a later power supply with molex connections will sui
von - by
seancalla
-
Alles rund um Musikboxen
Hi
It is 20" eye to eye
It is a Stabilus model
54 Koblenz W-Germany
03 08 200 162/ 0570 N 25/7
von - by
seancalla
-
Alles rund um Musikboxen
i have attached dome photos of the keyboard if you could explain further how to jumper them together
regards
von - by
seancalla
-
Alles rund um Musikboxen
Hi
Would anyone have one of these machines and would they be able to send me some photos of the amplifier in particular where the remote volume control connects and the sliding switch on the front of the amp to set the rvc
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Thanks for the response, is the series switch the wiring on the keyboard wafer or the actual keyboard contacts
regards
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I have a selection problem with this machine, on all selections the keyboard locks in and write in arm starts, but it will not stop and make every selection, for example A0, 1,2,3,4, 5, 6, and 7 will select, but A8 and 9 will bot select and write in arm just continuously searches.For other letter and number selections the slection is very hit and miss. I have cleaned the wobble plate slip rin
von - by
seancalla
-
Alles rund um Musikboxen
Thanks the lubrication of the tone arm post and tone arm linkage solved the problem,
regards
seancalla
von - by
seancalla
-
Alles rund um Musikboxen
Hi
I have this jukebox and the tone arm does not seem to operate correctly, the tonearm should swing back before the gripper arm places the record on the turntable, but however the tone arm barely moves and as a result the gripper arm cant place the record on the turntable.
If i manually do it and play the record and when it reaches the end of the record the tone arm lifts slightly but does not
von - by
seancalla
-
Alles rund um Musikboxen