Zeige alle Beiträge eines Teilnehmers
Thanks for the answers, the problem is that how do I adjust the current because the amplifier does not have any control potentiometer (do I need to change components) and secondly I don't own the correct manual (Onlineshop is not open at the moment)
von - by
vellu
-
Alles rund um Musikboxen
Here again .......... :)
The channels are fine now but the amplifier's heat sink heats up really hot in the standby position, which is why?
von - by
vellu
-
Alles rund um Musikboxen
Here again .......... :)
The channels are fine now but the amplifier's heat sink heats up really hot in the standby position, which is why?
von - by
vellu
-
Alles rund um Musikboxen
The good news, elko and zener were both broken as you thought and I put the zener in the wrong direction (of course). Thank you all very much and thank you Jürgen02 for pointing out the direction of the zener again.
Now it's playing, the other channel is a little weaker but yes yes it work and not boiling anything :) :)
von - by
vellu
-
Alles rund um Musikboxen
Thanks for the good advice, I'm not very "strong" in semiconductor technology but I do measurements and I tell you where the smoke comes from :)
von - by
vellu
-
Alles rund um Musikboxen
Thanks Charly 49H, Swen and others
This explains many things to me, I also researched the wiring diagram and was wondering about the S306A number. But but, what could be the reason that the resistor R69 heats up and also the terminal transistors are too hot if it is on a while but works yes.
What do you suggest "s306a" instead of having the same housing?
von - by
vellu
-
Alles rund um Musikboxen
Marc ,please tell me how did you found it ,can you copy the title site to me ,thanks
von - by
vellu
-
Alles rund um Musikboxen
thanks for the answers, it's from Rowe MM1's R3680A amplifier (voltage supply) and in finish :)
kiitos vastauksista, se on Rowe MM1 :n R3680A vahvistimesta (jännitteen syötöstä)
von - by
vellu
-
Alles rund um Musikboxen
I couldn't find on google what this is , and what would be a replacement?
Thank you in advance.
R.vellu
von - by
vellu
-
Alles rund um Musikboxen
Thanks for the answer, by trying I already got the numbers in place but I got a good tip from you that the stop reel settings must be in place so that the right disc is playing. Thank you
von - by
vellu
-
Alles rund um Musikboxen
Hi again!
Same lyric and problems continue, I disassembled the selection machine to clean all surface but i forgot make any mark, question ,how i make reassemble .I have manual but in this manual has all parts and "exploded image" but i don't find any adjustment instructions.
R. ukko from Finland
von - by
vellu
-
Alles rund um Musikboxen
Hi again!
Same lyric and problems continue, I disassembled the selection machine to clean all surface but i forgot make any mark, question ,how i make reassemble .I have manual but in this manual has all parts and "exploded image" but i don't find any adjustment instructions.
R. ukko from Finland
von - by
vellu
-
Alles rund um Musikboxen
Thanks Swen for the advice, i had already forgotten my question .Old man.......
von - by
vellu
-
Alles rund um Musikboxen
Greeting!
Old problems have been solved, but there are new ones. I choose the number 6 and the b-side, the tray can not find all .All other numbers is working (a / b.)
I thought the audited wires and switches, I can not find reason .Do someone had the same fault.
von - by
vellu
-
Alles rund um Musikboxen
Hey friends
I repaired Nsm- 120 prestige, and now have questions, Amp 70s bb. I managed to get a sound for it but there is too much bass in the sound and also too much "sound from the disc" if anyone could say which component should be researched / replaced. I have already changed a few of the capacitor. thank you in advance
von - by
vellu
-
Alles rund um Musikboxen
Ok,I was just thinking because my machine has no heating resistance at all (but in the wiring diagram it is)
von - by
vellu
-
Alles rund um Musikboxen
Tiedän kyllä,mutta itselleni saksan kieli on tuntematon,englantia on joskus nuoruudessa hieman opiskeltu,jonka vuoksi vähän ymmärrän
kuinka google kääntää,yritetään ymmärtää.Hauskaa viikkoa!
(esimerkiksi tässä käännöksessä google jätti sanoja pois joita se ei tietänyt)
I know, but for me the German language is unknown, sometimes English has been studied a bit, so I understand a little
how g
von - by
vellu
-
Alles rund um Musikboxen
I have a strong suspicion that your machine has the wrong part. The resistor in the upper corner gets very hot if the carriage has an AC motor, there should be a gray dc motor,lower one.One or the other is wrong, carriage or card
von - by
vellu
-
Alles rund um Musikboxen
Hello friends, i am guy from Finland and try to "do" everything :)
I have try to fix carriage of Nsm e 160 Prestige, and now i have problem,record transfer arm is too high and carriage cannot move ,is there any adjust. There is some picture also. (I did't manage to get pictures to here)
Sorry my english, i need to use Google translate.
von - by
vellu
-
Alles rund um Musikboxen