Zeige alle Beiträge eines Teilnehmers
Ergebnisse 121 - 136 / 136
Andre
i turned the JB on tonight and he play relay did not energise then i switche to scan mode the relay clicked in and the TT started but the magazine did not work, tomorrow i will check for the 28vdc , which position should the selection levers be so no they are not in play position on the selector plate as i am not sure
regards to all for info and advice
mick
Andre
Ich habe heute
von - by
bopper
-
Alles rund um Musikboxen
Hi Chaly49
cheers for the info, the basket turns freely manualy so i am going to check for a voltage at motor connection
best regards
mick (bopper)
von - by
bopper
-
Alles rund um Musikboxen
hi to Rgds Jurgen and Andre for the advice and help, i am going to retest the micro switches and the positions in cam grooves when in the hom position , Jurgen your reason no1 no 28v to the power supply
conducter do you mean the cable feeding the magazine motor?.Andre i am still not happy with the TT unit
it is running at 33rpm i may have the lever that mounts behind the gripper gear in the w
von - by
bopper
-
Alles rund um Musikboxen
thanks for the info, the play control relay is energised as soon as the box is turned on the only way to stop the TT is with the scan switch in the off position.I have tested the micro switches for n/o n/c and the seem ok also checked there secquence of operation that is also ok,but i will go over this again to be sure,
there is still the problem of the magazine not working in the scan positio
von - by
bopper
-
Alles rund um Musikboxen
Ich habe eine Rockola 430 erhalten, die TLC benötigt, der Greifer wurde vollständig beschlagnahmt und der TT in Bits. Ich habe die Greifereinheit umgebaut und dies ist nun in Ordnung (manuell), der TT scheint jetzt in Ordnung zu sein. Die JB hatte eine 120V Netzteil, das ich durch ein 230V ersetzt habe, fehlte die Curret-Begrenzerlampe in der Gutschrift, die jetzt ersetzt wurde. Wenn ich auf der
von - by
bopper
-
Alles rund um Musikboxen
Hi Andre
thanks for your inut, the reason i thought about it was i have just aquired the JB which needs a lot of TLC
the TT motor was hanging loose no grommets / screws so i intended to remove the comlete assembly
to clean etc, i removed the scews to the gripper housing the nut on the stud but could not locate the other fixing, so i fitted grommets / scews to motor and re-asssembled it ,i ha
von - by
bopper
-
Alles rund um Musikboxen
many thanks for your answer,do you suggest i leave things as they are, will theJB automaticly play 45's with no centre's without changing the turntable
von - by
bopper
-
Alles rund um Musikboxen
i have a rockola 430 it is fitted with 33 /45 interix system is it easy just to replace with a plain 45rpm turn table unit instead
any info please
von - by
bopper
-
Alles rund um Musikboxen
hi
thanks for reply and advice ,i tested the relay and it works fine, i found the problem to be no1 micro switch which i changed and all back working ok ,again thanks for advice
bopper
von - by
bopper
-
Alles rund um Musikboxen
hi
can anyone please give advice on my jukebox problem, the 430 is playing perfect but has just devoleped a fault ,when the tonearm reaches the end and the runoff on the record it does not operate the reverse relay and return ; i have relaced the control box thinking it could be the relay but no difference,
i have checked the tonearm switch and this operates as it should , the manual cancel but
von - by
bopper
-
Alles rund um Musikboxen
Hi
could someone please advice as to which 100 selection selector assembly ( will any other model fit) will fit the 430 jukebox, including write in and read out
assembly any help please
von - by
bopper
-
Alles rund um Musikboxen
Hi Hildegard
many thanks for the information it's a great help ,i do have the manual which i purchased from yourself and now i understand the part no's
thanks
bopper
von - by
bopper
-
Alles rund um Musikboxen
Hi
could someone help me by giving me the part no of the gripper motor on the rockola 430 ,is this motor the same on the 1484 thanks
bopper
von - by
bopper
-
Alles rund um Musikboxen
Hi
if i understand correctly you are enquireing about the back panel on the 430, this is a metal panel wwich sits in the opening and is simply screwed into the wood surround, hope this helps
bopper
von - by
bopper
-
Alles rund um Musikboxen
Hi Hildegard
this problem is not very old, the box is in good condtion and is servived, the box is stil working fine apart from this niggling fault every so often. .the magazine motor has not been overhauled but seems to work ok, i have replaced the control box thinking it might be a relay problem when the rcord has finished the sequence is ok the gripper returns the record to the magazine and t
von - by
bopper
-
Alles rund um Musikboxen
Hi
i have a slight problem on my Rockola 430,now and then after the gripper returns a record to the magazine instead of the magazine either going to next selection or returning to zero ( if no more selections) it does not move ,than after a few seconds it continues correctly, could this be a sticking relay or something else ,any help please
many thanks
bopper
von - by
bopper
-
Alles rund um Musikboxen