Zeige alle Beiträge eines Teilnehmers
Thank you very much Swen for your extended explanation of credit unit.
I have already sorted out this problem at the moment.
The fault was on " pushbuttons bar socket" some of the pins did not make contact, so I expanded the pins with a screwdriver a lit of bit, in order to make right contatct... between each other...
Now the jukebox is working again
Thank you very much
von - by
carloselvira
-
Alles rund um Musikboxen
I already sorted out the problem. It was easy, I didnt know the starter was located on the left hand side of the lamp, a bit hide...
I believed the wires were missed, but not.
I was nearly finished to restore a rockola capri 100, and it gets I a new problem.
Jukebox wont get credits, once the coin drops into machine!!!
Only the ratchet levers accumulator is actioned.
I checked th
von - by
carloselvira
-
Alles rund um Musikboxen
Hello Everyone;
Can anyone show me the conection wires for the front light of capri rockola 100, please?
I nearly finished a restoration of this jb, and the ballast and starter is missed.
THANK YOU
von - by
carloselvira
-
Alles rund um Musikboxen
Hello Jürgen02;
Thank you for posting; I,ll order it very soon, by the time I will be making some checkings,
I suspect it is not only the ab Switch which is fail, probably there are some more parts, I will inform...
Your help has been very useful, thanks a lot.
Carlos
von - by
carloselvira
-
Alles rund um Musikboxen
Hello Jürgen02, first of all say thank you for your interest on my issue...
Is the link you have send to me suitable for rockola capri 100, 404 please? do you know that<?...
I had a look to the link you have sent to me and that is what I have been missing from the beggining... very helpful your post... thank you...
I have to do lot of job of restoring...
ab switch randomly make r
von - by
carloselvira
-
Alles rund um Musikboxen
Hi everyone; With the step I have explained avobe probably would be enough for only sort out this specific problem.
but In the case of my JB, has more troubles that I have to solve.
Does anyone Knows where to find a WIRING DIAGRAM FOR CAPRI 100? I mean a detail wiring diagram, no generic.
The thing is; after solving what I explained above, what happen now its the JB reconigned the sel
von - by
carloselvira
-
Alles rund um Musikboxen
In case of helping to someone!!!!
There are many reasons for carrousel not stop when making a selection...
--- a/b snap switch, relay... etc
In my case I found the solution by getting info in several pages and studying the JB
One common reason for that, are the contacts...
In this case I have disassembled
the outer carriage after doing a lot of checkings.
I found two sprin
von - by
carloselvira
-
Alles rund um Musikboxen
Hi everyone, I have several issues to solve in a deep restoration process, I have make some improvements but I need assistance at this point, please.
Rockola Capri 100, makes the selections after manually pressing the coin switch, but the thing is;
the carrousel dont stop and gripper arm dont grab the record.
micro switch work fine. n3 on
n2 on
von - by
carloselvira
-
Alles rund um Musikboxen
I share a link with Harting m100k working in order, after a lot of work on it.
thanks to this forum specially to PITINWHY.
Some parts have been replaced, but are not original, due to lack of replacements.
Please feel free to comment the images, thank you everyone.
von - by
carloselvira
-
Alles rund um Musikboxen
.
Thanks to everyone for helping me to finished of restoring my jukebox. After a hard job I attached a pic for seeing in the last procceess.
I have one more question for those who owned a harting or bergman jukebox. 100
The sound of this machine is powerful and great, but I have noticed that the top speaker for high frecuencies is very low. you have to get closer your ears to noti
von - by
carloselvira
-
Alles rund um Musikboxen
I,d like to thanks to everyone who read my post and helped me, especially PITINGWHV for your inconditional help.
After several months of patience and working its hopefully seems the juke works quite properly, lot of adjustements and replacements...
see video attached.
Regards.
von - by
carloselvira
-
Alles rund um Musikboxen
Thanks very much Pitingwhv for your greatful help, I apreciate once more...I ll inform the improvements...
von - by
carloselvira
-
Alles rund um Musikboxen
Hello everyone!!! I,m still having some troubles with harting m100k, need please some germany help because i dont understand a word to translate the manual.
I need to know what SWITCH ACTIVATE THE COIL FOR ODDS SELECTIONS? for make and adjustment
Theres such a small delay on the cycle and thats makes the record hook crash into turntable unit and get block.
von - by
carloselvira
-
Alles rund um Musikboxen
Thanks Pitinwhv... your help is been indispensable, I appreciate.
Thanks to your scheme I could arrange this problem...Now its working again...
This is due to termal fuse, which I have had to move it a little bit, within its position because it didnt conctact on the edges properly... Just that....
what I have to do is finish the turntable part... it will take me few days hope s
von - by
carloselvira
-
Alles rund um Musikboxen
Pitinwhy thanks again for your help...
That,s it!!!!, thats the description i was looking for... brilliant!!!... Now i have to find all that scheme parts and check them one by one...!!!!
Yes, you are right, I think I have a "strong motivation" and apart from that all your helps is a motivation also, thank you very much.
The video you saw the other day is a "tempo
von - by
carloselvira
-
Alles rund um Musikboxen
Thanks Swen...
It is not about the coil on link which its been replace already also. K2))) contact.
Now the problem start on contact K6... which is fine.... What I mean, the tonearm dont reject the record even.
The machine is in "play position" and theres no way of reject the record from the turntable.
von - by
carloselvira
-
Alles rund um Musikboxen
Hello Pitinwhv and everyone...
I open this new topic because, I was nearly finish my restoration project as you can check in video enclosed,
but I got another fault on Harting m100k.. (Its been a lot of steps i had to take to get several improvements, etc)
For some reason it doesn,t finish the playing cycle, when record is finished playing, dont came to rest position, it is nothing ab
von - by
carloselvira
-
Alles rund um Musikboxen
Hello Pitinwhv and everyone!!!
Hard but greatful job...
work in progress...
Cheers.
von - by
carloselvira
-
Alles rund um Musikboxen
Hello Pitinwhv and everyone!!!
EUREKA!!! it finally works this part
Thank you pitinwhv for you help and downloads, you owned a great manual parts.
Now the "changing sides system works" after a hard job.
I Had to disarm nearly the whole part and align rod, axis, gearwheel, grease parts... etc
I Had to streng the axis with special metal glue due this mess caused a big dama
von - by
carloselvira
-
Alles rund um Musikboxen
Hello everyone, hello pitinwhv, I,m still working on it.
But things going much better.
I Had to place a washer on the axis of rubber piece, just to align and correct the axis...
This is due the black rubber piece is weared on its axis and make the rod bend itself.
After that, checked the "side change system" and did it properly, but not as soft as I wish, so thats mean I ha
von - by
carloselvira
-
Alles rund um Musikboxen
OMG... Thats a great video... Cheers!!!! works perfectly...
That made me clear my mind !!!! I guess I have chosen a high difficulty jukebox for restoring je je je
Exactly, the rod is not align and a bit bended... this is going to take me a few days of restoring... I,ll came back in a few days...
von - by
carloselvira
-
Alles rund um Musikboxen
oh thats sounds great... you are lucky your harting works je je je... keep it right!!!!!...
I havent come back yet to forum, because have same trouble with same device...
At the moment, all the mechanical adjusting parts looks correct...
"selecting records, pick up records, and place in to turntable system. motor records.... Everyting is correct,
Excepting "t
von - by
carloselvira
-
Alles rund um Musikboxen
Joint is at its right position now I guess... Maybe is the black piece of gum or bouncy tense force... lets check and I will inform...
von - by
carloselvira
-
Alles rund um Musikboxen
thank you pitinwhv... yes...t looks like good but have to check how it works :)
According to your pics it seems to be right the position :)
But i,m a bit worry with Main rod... seems to be a little bit bend... pics with arrow""""
von - by
carloselvira
-
Alles rund um Musikboxen
Now this part is fixed again.
---this is "SIDE ONE PLAYING RECORD POSITION" (pic attached)
Pitinwhv, could you check and compare on your machine please if you have the same position?
Even the main rod is align looks like a bit bend at end i dont know if is the bouncy force on joint...
I.m bit worry this mess happen again due never worked properly...
Thanks
von - by
carloselvira
-
Alles rund um Musikboxen
Thank you pitinwhv for your help, cheers!!!
Thats a good information, now I,m rebuilding this damage part by now.
I thing the fault was in the " pick up main rod" adjusting... , and coud beat the joint causing this mess... terrible.
All the mechanical parts are very close each other, and just a small adjusting may cause a control mess...
but I repeat... when the machine came,
von - by
carloselvira
-
Alles rund um Musikboxen
Thank you for you help pitinwhv, I really appreciate it...
At this moment the "picking up system" is correctly adjusted and work properly excepting the change sides system due to this damage
I,m going to try to fix this part of the jukebox, but I,m scared this happend again due never worked properly this system when the machine came...
von - by
carloselvira
-
Alles rund um Musikboxen
ok, I know what you mean pitinwhv, i do not have too many idea about that...
I knew joint 2 were not in the right position... now i see the bad adjustment can damage so much...
The rod is even bended, pieces are very precision and have to avoid more damage..
von - by
carloselvira
-
Alles rund um Musikboxen
Cheers Pitinwhy!
which model of Harting do you owned? seems to be a bit different.
Mine has two rods with joints.
I have attached a drawing.
Joint1
joint2
Both seems to run on the curve wheel as you explained on your post. but in the top not in the bottom.
joint 2 seems to need to run between two rails at the end of cycle ( drawing), but just because is loosened, nothing
von - by
carloselvira
-
Alles rund um Musikboxen
Thank you for your help pitinwhv, I need to see that piece of metal with golden joint to see how it goes, because mine out of its place and and lose.
von - by
carloselvira
-
Alles rund um Musikboxen