Forum:
»
Alles rund um Musikboxen
»
Thema
RO 1454 control box 20.05.13 18:44 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 21 |
Hi there
can anyone tell me what resistor goes between the cancel relay and the 8 prong socket in the 1454 control box, it has something to do with the gripper motor.
thanks. alanm43.
can anyone tell me what resistor goes between the cancel relay and the 8 prong socket in the 1454 control box, it has something to do with the gripper motor.
thanks. alanm43.
Re: RO 1454 control box 20.05.13 19:51 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 188 |
as the 1454 is about the same as the 1448
sure you mean resistor instead of condenser ?
there are 3 .05 MDF 400V condensers in the control box
24AB2
as the coding on the condensers are in a way similar to resistors this might cause confusion
strangely enough in the manual there are 3 condensers
but the schematic of the 1448 shows 4
can't remember how many there were when I replaced them
1 mal bearbeitet. Zuletzt am 20.05.13 20:10.
sure you mean resistor instead of condenser ?
there are 3 .05 MDF 400V condensers in the control box
24AB2
as the coding on the condensers are in a way similar to resistors this might cause confusion
strangely enough in the manual there are 3 condensers
but the schematic of the 1448 shows 4
can't remember how many there were when I replaced them
1 mal bearbeitet. Zuletzt am 20.05.13 20:10.
Re: RO 1454 control box 20.05.13 20:14 |
Registriert - Registered: 18 Jahre - Years Einträge - Posts: 820 |
Hi ,
there is only one resistor inside the Control- Box and it's not in my scematic of the 1454 ?!?
I have one box in my storage and I measured the resistor with 5 Ohm ?
Regards B&K
there is only one resistor inside the Control- Box and it's not in my scematic of the 1454 ?!?
I have one box in my storage and I measured the resistor with 5 Ohm ?
Regards B&K
Re: RO 1454 control box 20.05.13 20:21 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 188 |
Re: RO 1454 control box 20.05.13 21:22 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 21 |
Re: RO 1454 control box 20.05.13 21:56 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 188 |
Re: RO 1454 control box 21.05.13 14:38 |
Registriert - Registered: 18 Jahre - Years Einträge - Posts: 820 |
Hi alanm43,
I think , it will be not more than 5 Watt !
If you will be on a very safe side , take a 7 Watt resistor!
Regards Klaus
I think , it will be not more than 5 Watt !
If you will be on a very safe side , take a 7 Watt resistor!
Regards Klaus
Re: RO 1454 control box 21.05.13 16:52 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 21 |
Hi B&K
iv gone for 6.8 ohm--7 watt resistor and it works fine
thanks alanm43
iv gone for 6.8 ohm--7 watt resistor and it works fine
thanks alanm43
Re: RO 1454 control box 24.05.13 10:28 |
Registriert - Registered: 17 Jahre - Years Einträge - Posts: 172 |
Hi alanm43
Just a question:
What is the reason for the exchange of that resistor? With other words, what would happen in case of a faulty resistor?
regards
Eddie
Just a question:
What is the reason for the exchange of that resistor? With other words, what would happen in case of a faulty resistor?
regards
Eddie
Re: RO 1454 control box 24.05.13 11:09 |
Registriert - Registered: 11 Jahre - Years Einträge - Posts: 21 |
Hi Eduard Furrer
I changed the resistor because the gripper motor was reversing very slow ,almost at a stop.
regards alanm43
I changed the resistor because the gripper motor was reversing very slow ,almost at a stop.
regards alanm43
In diesem Forum dürfen nur registrierte Mitglieder schreiben.
Zum Einloggen oder Registrieren folgen Sie LogIn - Registration.
Sorry, only registered user may post in this forum.
To login or getting registered please follow LogIn - Registration.
Zum Einloggen oder Registrieren folgen Sie LogIn - Registration.
Sorry, only registered user may post in this forum.
To login or getting registered please follow LogIn - Registration.
Klicken Sie hier, um sich einzuloggen - Click here to log in