Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 4 / 4
Hi Axel,
Thank you for your reply. I did already change the roller inside the heart cam for an oversized one, it is a very close fit now and I don't think I could put anything bigger in. I also checked for play in "bearing and link assembly" and this is minimal.
A few moments ago - in desperation, I took the pin out of the star wheel and rotated it slightly then just tightened
von - by
adrian_brierley
-
Alles rund um Musikboxen
I have a problem with a W750 mechanism that is driving me mad! The machine came to me because it had jammed up due to 2 record trays being pulled out at one time. After getting the mechanism free again I found that the tray takeout lever was not always in the centre of the tray when the selection was locked in by the star wheel. In some cases it was very close to the tray above or below and this
von - by
adrian_brierley
-
Alles rund um Musikboxen
Hi Jens, Thanks for this information - I was thinking the only way to fix it would be to machine down one of the pulleys, but that seemed wrong! Now I know there were different sizes it's not such a way out idea! The machine is a couple of hundred miles from me, I don't remember any coloured markings on the wheels but I will ask the customer to check.
Best Regards,
Adrian.
von - by
adrian_brierley
-
Alles rund um Musikboxen
I have a strange problem with an NSM Serenade - it is playing records at about 47 rpm. This is the single motor, 2 belt carriage. I have replaced the belts, and the motor run capacitor. It still runs too fast! I noticed that the resistor in series with the motor cap is adjustable (the schematic shows a fixed 200 ohm resistor) so I tried adjusting this - still no change in the speed. Anyone else
von - by
adrian_brierley
-
Alles rund um Musikboxen
1 / 1 1