Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 25 / 25
Hello Hildegard
I will try to contact John. If he is not able to help me, I have to see if it is possible to build in another pickup. I can see that the amplifier need a inputsignal on 1,5 Ohm.
Do anyone know what alternative to use, to replase old the old pickup.
Thank You
Regards
Esben
von - by
maponi
-
Alles rund um Musikboxen
Hello
Amplifier seems to work. but the rubber in the stylus is damaged, so the sound is no good.
If it is possible to get a new stylus it could be nice. Do you have a idea where I can find a new stylus?
Regards
Esben
von - by
maponi
-
Alles rund um Musikboxen
Hello
I have a old Jensen J - 40 jukebox that need a new Stylus/Cartridge. I have looked for a new stylus, but it seems to be hard to find. Can anyone help what I can do.
Look at photo taken of the old one.
Regards
Esben
von - by
maponi
-
Alles rund um Musikboxen
Hello
I have problems about a seeburg S200
Problem is that when I press the selection button the wagon start moving from the one side to the other, and back again without picking up a record.
Can someone help what to look for.
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello
Now I found out that the Power transformer on my Wurlitzer 543 is burned. On the transformer I have 15 wire comming out of it.
Now I am looking for a powertransformer or a complete 543 amp.
Do anyone know where it is possible to find such a transformer or amp. ?
I have asked Jukebox Revival and Jukeboxparts without luck.
Regards
Esben
von - by
maponi
-
Alles rund um Musikboxen
Hello Again.
Yes. I understand what you mean. The ampilfier is for the 115V.
What I dont understand is that there is no transformer in front of the amplifier, and the machine have runned where we have 230V.
Maybe there have been an external transformer before I get the machine. But do you know what was normal for the machine for 230V. Did they have a external transformer ?
Regards
Esbe
von - by
maponi
-
Alles rund um Musikboxen
Hello Charly49
Thank you for the answer. Sorry for my late reply, I have been on holiday.
On the jukebox I have 2 plug like for the 230V. The one goes directly to the Amplifier. It means that I have no transformer that goes from 230 - 115V inside the jukebox.
Was it then a external transformer for the jukeboxes that shoud work on the 230V
Regards
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello
I have got a Wurlitzer 2610 with a 543 amplifier that is not working.
I have got a spare Amplifier, but I am not sure if it is for the 120V or 230V input. I can not measure on the old transformer, because it is burned.
Can someone help about the value for resistance on the Input side of both T2 and T3 transformers ? when it have to be connected to the 230V supply.
Thank You
Reg
von - by
maponi
-
Alles rund um Musikboxen
Hello Magnus.
Thank you.
Do you know where I can find the discription on the geldspielefreunde.de?
Regards
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello
I have a NSM Fire Bird CD Jukebox. It is working OK. Is there any kind of batterybackup in this machine, to save the parameters? I hope someone can help me. It could be nice to know if I have to change a battery.
Regards
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello Again Charly
Now I have found where the spring is placed, and you are right, It is broken. Now I also can see the function of the spring, so that excact what wrong. The spring make the same restiance, as I can do with my finger.
Thank for all response.
Thank You wery much
Regards
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello Charly
Thank You
It sound like that is my problem. I have not seen a spring like photo in my Jukebox, and discription is just what happen when I make a selection.
I look for it monday. Do you know where to look?
von - by
maponi
-
Alles rund um Musikboxen
Hello Again
Thank you.
I have tried to adjust, but the problem is that the curve that bring the arm in the playposition seems to go to fast. Therefor the weight of the pickuparm make it continue, and therefor going to long because of the speed. if I put a finger on the pickuparm (To make a little resistance) when it moves,it stop in the right position every time.
I think if the motor for the c
von - by
maponi
-
Alles rund um Musikboxen
Hello
I have a jukebox Rock Ola 445 where i sometimes have a problem.
When I make a selection the mechanism start to find the selection and put it on the turntable. when the arm goes to the single, sometime it goes to long and start to play a little inside the song. I Have looked for the mechanicle, and it seems to be OK. It seems that the motor is going to fast, so that the arm turn to long di
von - by
maponi
-
Alles rund um Musikboxen
Hello Willi
I have not new potis, but now I have cleaned the old one, one more time, and now it is playing as normal, so you are right, the potis was the problem.
I an very glad about your help, it is nice that someone have so much experience, and want to help.
Thank you.
Regards
Esben.
von - by
maponi
-
Alles rund um Musikboxen
Hello Willi
I will try to change them, and let you know what happen.
Regards
Esben
von - by
maponi
-
Alles rund um Musikboxen
Hello Again
I have now changed the 2 resistors R65 + R66 0,47Ohm
I also changed one capasitor C34.
Still I have the bad sound in the first 15 - 30 sec of playing a record.
I then tryed to solder all the points on the back of the printboard to bee safe of all the connections., but still the same problem.
Do anyone have a idea what else I can try to do ?
Regards
Esben
von - by
maponi
-
Alles rund um Musikboxen
Hello Again
Tank you
To be shure the numbers of the resistors is R65 and R66.
I do not know if they are broken, but I will try to change them.
Do you know if it can have the influence of the bad sound ?
It seems that somthing have to be loaded before the sound is OK. Like a capasitor.
Have someone got the same problem about the sound ? and what the problem can be.
Regards
Esben.
von - by
maponi
-
Alles rund um Musikboxen
Hello again
On the printboard I have 2 resistors that have been a little hot. On the backside of the printboard the weldings is OK,
I can not see the value of the resistors.
Can the resistors bee the problem about the soundproblems ?
Do someone know the value of the resistors ?
Thank You
Regards
Esben.
von - by
maponi
-
Alles rund um Musikboxen
Hello Again
The jukebox is now running.
When I select a record, the sound in the beginning is no good, but after 30, sec. the sound is like normal.
The amplifire is type NSN 35M ( Mono anpilfire )
I Have cleaned all thr potis, and also cleaned the relay on thr printboard.
Can someone help what to look for to get the sound OK.
Regards
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello Willi
Thank You
It works only with a bridge instead, but I will look for a new coil.
It was a lot of work to get such a old machine running.
Thank you
Regards
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Sorry
Do someone know the function for the component like photo ?
Thank You
Maponi
von - by
maponi
-
Alles rund um Musikboxen
Hello
Thank you for helping.
After a long time and a lot of measuring I found the fault. It was a defect component like photo, on printboard LP2. I do not know the function of the component, maybee capasitor or !!!!
I just make a bridge instead, and then the search relay get active, and stop the carriage in the right place.
von - by
maponi
-
Alles rund um Musikboxen
Hello Again
I have now looked a little more on the jukebox. I Have cheked the coil on the relay on printboard LP1, and it is OK.
I have also checked the cabel 2wire that goes from the contactplate in the back of the rack to the print PL1, and wire is OK.
I Wonder a little, because if I measure on each contact on the contactplate, it goes to the ground. Is this right ?.
I hope someone can help
von - by
maponi
-
Alles rund um Musikboxen
Hello
I have just got a HSM Jukebox model Hit 120 from 1971.
I have cleaned the jukebox, and all the mechanical have got a little oil.
My Problem is, when I make a selection on the bottoms, the carriage goes from the right to the left, and back again and stop.
The Carriage can not find the selection i make.
I have cleaned the contacts on the back of the carriage, and also the many small con
von - by
maponi
-
Alles rund um Musikboxen
1 / 1 1