Zeige alle Beiträge eines Teilnehmers
Ergebnisse 4081 - 4086 / 4086
Hallo Marc
Das SC35 dürfte in den meisten Fällen einsetzbar sein. Bei gewissen Geräten, die über keinen Eingangspegelregler verfügen (z. B. Rowe-AMI) könnte es Probleme mit der Lautstärke geben, weil das System nur 5mV Ausgangsspannung hat.
Viele Grüße
Charly49
von - by
charly49
-
Alles rund um Musikboxen
Hallo!
Es gibt offensichtlich einige Unklarheiten über die verschiedenen Versionen des bekannten Shure M-44.
Es gibt einen Tonabnehmer mit der Bezeichnung SHURE M44. Dieser Bezeichnung ist ein Buchstabe oder eine Ziffer nachgestellt, der aussagt, mit welchem Nadeleinschub der Tonabnehmer ausgeliefert wurde. Der Tonkopf selbst ist immer der gleiche.
Es gibt original 6 verschiedene Einschü
von - by
charly49
-
Alles rund um Musikboxen
Hello Michel,
the automix version in Your machine is different to the description in Your manual. I think You have the newer version and this version is more common. I have never seen the other version. I will try to explain it once more:
33RPM: The pin on the center puck ist pushed and opens the microswitch. The solenoid is disactivated. The plunger with the idler wheel stays in the UPPER
von - by
charly49
-
Alles rund um Musikboxen
Hello Michel,
it seems, there are some different versions of the automix. Obviously Your system is like I described and remember (I have worked on this machines in the sixties and seventies), with the smaller diameter of the shaft on the top, but with reversed function. Probably the solenoid must be activated to push the idler wheel in the lower position for 45RPM. The function will be activat
von - by
charly49
-
Alles rund um Musikboxen
Hello Michel,
I think Piet is right! The upper (small diameter) part of the shaft is for 33RPM and the lower part (bigger diameter) is for 45RPM. In USA, the motor runs with 60Hz 20% faster than in Europe with 50Hz. The two springs are needed for the conversion 60Hz to 50Hz. Maybe the service manual is some confusing, but is is written in and for the USA, where the two springs are not needed.
von - by
charly49
-
Alles rund um Musikboxen
Hallo Michel,
ich hoffe, dass ich nicht zu spät komme, aber ich bin eben erst auf Ihr posting gestoßen.
* Das Brummen nach dem Einschalten könnte von defekten Endröhren (7868) und / oder defekten Elkos kommen. Bei diesem Gerät wird der Verstärker durch den Stummschalter nicht komplett abgeschaltet, sondern es wird die Anodenspannung durch Vorschaltung eines Widerstandes vermindert und das T
von - by
charly49
-
Alles rund um Musikboxen