Zeige alle Beiträge eines Teilnehmers
Ergebnisse 181 - 210 / 265
Hey Follow the grey cable between carriage and Centrale ( there is only one!) Gusse the cable broke. There's a preamplifier on the carriag which may get no power then.
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey
If Control LEDs turn off while operation, this is never a good sign. They should be on at any time.
Did you check the voltage when the amplifier ist switched 'on' it CAN be that the rectifier is damaged.
There's also the possibillity the one of the power transistors broke.
You won't have much choices then checking the electronic parts and of course the Power-unit in
von - by
kaiCGN
-
Alles rund um Musikboxen
Hallo Willi,
das klingt mir nach einem Massefehler im Tonarm oder möglicherweise tatsächlich direkt im System, hast Du einen Ersatz-Tonarm, den Du ersatzweise anschließen kannst ?
von - by
kaiCGN
-
Alles rund um Musikboxen
ich würde vielleicht noch prüfen, ob die Motorbremse noch tut ... de große Keramikwiderstand löst sich auch gerne mal auf...
viel Erfolg!
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey David,
this sounds like a variety of small failures in the box.... When Carriage moves, doies ist show the position in the display ( counting down to 110) ?
When the carriage doesn't reverse the direction you will have to clean up the mechanic as there may be a lot of resiniified oil in the carriage... lokk also for broken plastics in the mechanic of the carriage.
Do you have a servi
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey sean, then you have to check if the Opto-Couplers are still fine..it may have catched some dust, there's a dozen possibillities which may cause this to happen.
You may also check the end-switch on the right, whether it still opens and closes correctly.
von - by
kaiCGN
-
Alles rund um Musikboxen
It looks like the solenoid isn't released. Do the numbers in the display make sense ?
When the carriage is passing the position, is the number right ( you can halt the carriage, but be very carefully!
When teh carriage passes the correct position, ist the relais active ?
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey Sean,
does the display count the steps while the carriage is moving ? Does it only move once per dialed record ?
Cheers
Kai
von - by
kaiCGN
-
Alles rund um Musikboxen
Hallo Jörg,
die Frage beantwortet sich eigentlich von selbst: Ersatzteile für die Box werden immer schwerer zu bekommen sein, andererseits bekommt es aber keiner Elektronik, wenn sie einfach nur 'an die Seite gelegt' wird.
Mein Tipp: Steuereinheit reparieren und dann fachgerecht verpackt einlagern.
Noch ein kleiner Tipp ( wundert mich eigentlich dass da keiner etwas dazu geschri
von - by
kaiCGN
-
Alles rund um Musikboxen
Hallo Neuling ;o)
Ich hab mal kurz im Archiv geschaut und da findet sich dieser Fehler nicht. Allerdings wenn die Box Jahrelang gelaufen ist und Du höchstwahrscheinlich nie eine Wartung durchgeführt hast, muss die Mechanik durchgesehen, gereinigt und teilweise neu geschmiert werden.
Wahrscheinlich ist der Hebel, der den lauf umstellt verklebt und schaltet deswegen den Motor nicht mehr um. Es
von - by
kaiCGN
-
Alles rund um Musikboxen
supi, Danke für den Tipp :) auch wenn ich mir keine Hoffnungen mache :)
@Frank Naja ... das kann mich aber kaum davon abhalten Die haben auch nicht mehr Daten als was im Telefonbuch steht ;o)
von - by
kaiCGN
-
Alles rund um Musikboxen
wie sieht es denn generell mit Pfanstiehl aus, produzieren die denn noch Systeme, und zu welchen Systemträgern und Tonarmen passen diese denn?
Meine alten Röhren-Phonokoffer werden bald neue Systeme brauchen und da stellt sich natürlich auch die Frage ob reparieren oder mit Nachbauten ersetzen ... sofern das überhaupt möglich ist.
Der Gute der die Teile repariert kann sich vor Aufträgen scheint
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey Darell ... that's a surprise to me ( maybe not to the others here ;o) )
Thanks for your reply
Kai
von - by
kaiCGN
-
Alles rund um Musikboxen
Hello Darrell,
It is always helpful to look inside the manual, I hope you have one ?
are you shure, that motor reverses the direction ?
Please check if there is no lever stuck because of resinified oil ... in some cases the end switches may be damaged.
Pls let me know if you need further assistance
Cheers Kai
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey Malcolm,
to tell you the correct Type of Transinstor you are looking at, it's nevertheless important to know which Amp aou are working at.
Cheers
Kai
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey Antti,
when the carriage starts: Do you see the display counting ? ( at least 179 should appear )
can you post a picture of the carriage ?
Thanks in advance
Kai
von - by
kaiCGN
-
Alles rund um Musikboxen
leider ist er schon wieder perdu...
"Die von Ihnen gesuchte Seite konnte nicht gefunden werden. Möglicherweise ist das gewünschte Video nicht mehr verfügbar."
schade
von - by
kaiCGN
-
Alles rund um Musikboxen
Klingt vielleicht jetzt etwas oberlehrerhaft,
aber den netzschalter habt Ihr aber schon gefunden und auch betätigt ?!??!
von - by
kaiCGN
-
Alles rund um Musikboxen
'Skill shot' das sind doch immer so Funktionen bei Flippern, wo man innerhalb einer bestimmten zeit etwas treffen muss ... ich würde also auch auf Flipper tippen ....
von - by
kaiCGN
-
Alles rund um Musikboxen
Oh thanks for that, this is not documentet in the manual :) Guess I'll save a printout for that!
von - by
kaiCGN
-
Alles rund um Musikboxen
Hello Sean,
I just mention the easiest possibillity, it could be that this is the case:
The consulette was probably adjusted to a different jukebox with less the 80 Singles please check if a cable or a plug sits at position F 7 and remove it while the box is powered off .
Good luck if this doesn't help, I'm afraid the the electronic is damaged,
von - by
kaiCGN
-
Alles rund um Musikboxen
Hello Luc,
The Resistance is more or less insignificant; it shouldn't go below 25kOhm and not above 100kOHM. It's more important that it's linear!
Explanation: The amplifier is voltage driven, Instead of putting the signal over this line the amplifier takes the voltage between 0-10V to control the power of the amplifier.
Cheers
Kai
von - by
kaiCGN
-
Alles rund um Musikboxen
Hallo Friedhelm,
eine Frage: Es gibt ja dieses Fahrrelais welches den Vortriebsmotor anlaufen lässt, fällt das irgendwann ab wenn es die Platte auflegt ( Das sollte eigentlich kurze Zeit nachdem die Nadel auf der Platte liegt passieren) ?
Was auch wichtig ist: wenn diese Relais verschmort sind, solltest Du unbedingt die Leiterbahnen drumherum überprüfen, nicht dass durch die Hitze eine unterb
von - by
kaiCGN
-
Alles rund um Musikboxen
The humming sound comes probably from a broken cable between turntable and the amplifier.
The Reject button normaly stops the play and forces the machine to let go of the record, the machine doesn't have a 'reset'-Button, sorry!
I'm not aware about your technical abilities. Is the servica manual on site ?
By pressing the reject button, do you hear a clicking noise insid
von - by
kaiCGN
-
Alles rund um Musikboxen
Hey, have you tried to push the reject Button of the volume controller....? You can also carefully try to push the Tone arm towards the Center of the record
von - by
kaiCGN
-
Alles rund um Musikboxen