Zeige alle Beiträge eines Teilnehmers
Ergebnisse 301 - 308 / 308
Hello,
I require a mechanism (carriage) for a NSM Hit 130 (the one with the Beatles logo glass) or a mechanism from that era.
Please contact me if you have one available.
Regards
Alan Hood
ami-man
UK
alan-hood@datex.co.uk
von - by
ami-man
-
Alles rund um Musikboxen
Hello Horbi,
Charly49 is correct if you do not have the manual then you need to purchase one so you can reset the error codes on the jukebox. Some error codes stop the jukebox untill it is switched off, other codes just add to the list of errors.
I would check that the uninsulated connections on the two microswitches have not shorted together.
Regards
Alan Hood
ami-man
UK
von - by
ami-man
-
Alles rund um Musikboxen
Hello Georg,
Charly49 is correct that your problem is down to two things that can be wrong with the setup on your mechanism.
1. The mechanism is not correct with the timing, the A1 position is out with the 200 mark on the Stop Plate Assembly. Also check the operation of the switches and the soldered connections on the slip rings on the stop plate assembly.
2. The Search Unit is pushing the
von - by
ami-man
-
Alles rund um Musikboxen
Hello Jurgen,
If you can not get any 2N6055 locally I have them in stock.
Please contact me off list if you need any.
Regards
Alan
Alan Hood
ami-man
UK
alan-hood@datex.co.uk
von - by
ami-man
-
Alles rund um Musikboxen
Hello,
I am looking for a Rowe Ami Model H keyboard assembly part number R-1330
Regards
Alan Hood
ami-man
UK
alan-hood@datex.co.uk
(44) 114 247 0242 phone
(44) 114 251 0727 fax
von - by
ami-man
-
Alles rund um Musikboxen
Hello Christian,
The other members of the forum are correct. You can use a 220-240 volts to 110 volt transformer or get a European Rowe Ami power supply to suit your jukebox, they are available on Ebay and Leon at www.jukeboxparts.co.uk usually has some listed in his spare parts.
If you are running on 50hz then you will need to change the pulley in order for it to run at the correct speed.
von - by
ami-man
-
Alles rund um Musikboxen
Hello Jurgen,
Rowe Ami 125 watt amplifier 6-07438-2
The original transistors would have been 2N6284 (NPN) and 2N6287 (PNP) they have a current rating of 20 amps and hfe bias of 10 amp compared with the BD318 and BD318 of 16 amps and hfe bias of 4 amp.
If you wish to contact me off of line I will see what information I can let you have.
Regards
Alan Hood
ami-man
UK
ala
von - by
ami-man
-
Alles rund um Musikboxen
Hello AMI Mattes,
Check out your manual for the RI-3 (any manual from R-84 to R-88 will give the adjustments) for setting up the opto switch. The opto switch is adjusted at location 99 as per the manual, this is the Home Position.
You should clean the opto switch and the drive gear that the opto reads. If you do not get the home light and index light pulsing when on scan have the Mechanism
von - by
ami-man
-
Alles rund um Musikboxen