Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 10 / 10
I have an AMI Continental 2 with the remnants of the 45/33 1/3 speed control. Trying to find all of the parts to bring it back to original has been a challenge. As an option, if I chose to convert to 45 play exclusively, how would I go about the transition starting with the turntable and the credit system? As for the credit system, how would I convert to Free Play without cutting wires, etc.?
von - by
jukester2
-
Alles rund um Musikboxen
Other than cosmetics, would a 2204 model mechanism be the same as a 1900 for a straight swap?
von - by
jukester2
-
Alles rund um Musikboxen
Greetings jukebox afficionados. My Rockola 1475 is giving me headaches. I recently had the amp and receiver rebuilt by a reputable technician. On the bench it sounds fantastic. However, when installed back in the jukebox, I get a noticeable hum (60 Hz?). The tech has come to the house to try and isolate without success. He has sequentially removed inputs while testing to the point only the
von - by
jukester2
-
Alles rund um Musikboxen
I'm working on a Continental 2 that has had the wiring butchered. The color codes in the manual are a little vague. Can someone please decipher these codes: S (what does the S stand for); BL (Blue or Black?); G (Green or Gray?). Additionally, does someone have a complete color code wiring diagram for the Edge Connecter that goes with the credit unit? The manual has a partial showing 8
von - by
jukester2
-
Alles rund um Musikboxen
Thank you Swen. The mechanism is out of the cabinet. The top plate and carousel are off. It is just the basic mechanism. If I understand you correctly, the backstop pawls will keep the crank from going counterclockwise continuously but it will still bounce back and forth. I'm thinking the crank could be stuck or rusted to the main shaft which the cam is part of. That might explain why i
von - by
jukester2
-
Alles rund um Musikboxen
Greetings. I am refurbishing a Wurlitzer 1900 that has a lot of problems. Right now I'm dealing with a selector crank that searches out the selection pin, strikes it and immediately reverses course, hits the backside of the pin and reverses course again only to do the same thing over and over. Sometimes it will move with the main cam counterclockwise and other times by itself. I can'
von - by
jukester2
-
Alles rund um Musikboxen
1 / 1 1