Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 6 / 6
I made some progress. With the help of guidance from a friend I removed the cable marked with purple and measured the points marked with red: 010. I also measured the points marked with yellow: 231.
It seems that my transformer is toast and I must start looking for a new one. Any tips in that regard?
von - by
Marko_Hki
-
Alles rund um Musikboxen
Oh, that's no good, someone has made some macgyver-connections there then... Thanks for your help in any case!
von - by
Marko_Hki
-
Alles rund um Musikboxen
I tested with the meter's "beep" -function, they all gave the beep. Then there is the one fuse in front, behind the "Ami Continental 2" -panel - it also gave the "beep". I have to admit, the fuse in the junction box did not seem at first to give the beep-sound, but it did, when I changed the meter's prongs' orientation.
The maker of the bluetooth-mo
von - by
Marko_Hki
-
Alles rund um Musikboxen
Ok, thanks for the tip. I did manage to open it, but the fuse seemed to be ok.
I had to splice the bluetooth adapter's wires into the yellow and red wire on the top of the Ami and I haven't covered their "wounds" yet with tape, but surely that cannot be the reason that the Ami won't boot up?
Might there be some safety feature that since the upper white deck of the a
von - by
Marko_Hki
-
Alles rund um Musikboxen
I think I found the fuse, but it was sadly ok. (pic IMG_0361)
Attached are pics of the fuses that I have spotted thus far and that have been ok.
von - by
Marko_Hki
-
Alles rund um Musikboxen
My AMI was working ok for a few days back, but then I decided to try and install a bluetooth receiver/adapter for the AMI.
I am a complete newbie in maintaining jukeboxes or electronics, but in order to install the bluetooth receiver, I followed the instructions included with the bluetooth adapter and:
- plugged two pins from the adapter to the 110V output on AMI's transformer
- inte
von - by
Marko_Hki
-
Alles rund um Musikboxen
1 / 1 1