Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 23 / 23
Hi,
when you select 6, 46 or 86, the pin selector move or no ?
Best regards
von - by
starskuch
-
Alles rund um Musikboxen
Hello Geir, hello folks,
what your selection on your K:
-electrical with stepper in
-manual
-automatic
Best regards
Frank
von - by
starskuch
-
Alles rund um Musikboxen
Hello,
if you run on 50 Hz, your conversion spring is present?
Maybe some oil on idler wheel/ turntable: clean up with soap and water.
Kind regards,
Frank
von - by
starskuch
-
Alles rund um Musikboxen
Hi Oliver, Hi jukebox's enthousiasts,
my Conti 2 has 6 screws on kick plate.
Size A: 63,3 cm; sizeB: 64,6 cm; size C: 31 cm.Difference of 3.1 cm between the screws in height.
Kind regards,
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Hi guys,
I saw this montage on two amps on the web:
A1: orange
A2: orange
E2: green
E3:black x2
E4: yellow+grey
E5: red
What do you think? Is it correct?
Kind regards,
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Oh! Sorry, excuse-me for my mistake, I was thinking about a 120 selections tempo 1. I misread the title!
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Hello Markus,
Sorry, I don't speak deutsch.
On left of title drum threre's a motor with a "notch cam" (with 3 grooves) and 3 cams. From left to right, cam1 = 1-40 titles, cam 2 =41-80, cam 3 81-120 (blue, yellow and red buttons).
When you pressed a button, 1-40 on left for example, motor is moving and cam 1 made touch 2 blades switches; the notch cam move until groove: the
von - by
starskuch
-
Alles rund um Musikboxen
Hello Guys, hello Oliver,
OK: 2 diameter spring = 2 speed, 45 and 33 rpm. I understand the operation of automix!
Thank you for the link, I read the item quickly without paying attention to the content.
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Hello Guys,
my conti 2 have not spring on motor shaft! And speed is good however.
The link of a enthousiast who made a new bronze ring, the music was trembling. And motor shaft had a hollow deformation.
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Hello Guys, hello Allen,
yes, double switch in scanning switch assemblyis a/b switch. You need to check connection between double switch/ control box/carriage. Without current the connections must be control, firstly.
What will I do:
1:Control of connections of double switch
2:Control of connections of control box (control box is under level operate/off/scan): maybe contacts of interlock rela
von - by
starskuch
-
Alles rund um Musikboxen
Hello Allen, hello Roland,
For selector coils
I thought they could be very very dirty (black dust). It was to clean the dirt without taking a shower. But yes, you're right, steel wool is to be avoided on magnetical parts, It was a bad tip.I have a picture of mine, they are also black (yet they are clean)!
I found how I reassembled pin selector on my Tempo 1: I plant them in a piece of pol
von - by
starskuch
-
Alles rund um Musikboxen
Hello Guys, hello Allen,
spring armature black is a "grand classic", often! Yes, you must clean top of selector coils with soap product, it must disappear. If it's not enough, rub it gently with steel wool "super fine": this product is fantastic.
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Hello,
it goes well! For strips, you can scrub them gently with a gum of schoolboy, it should be enough.
For armature spring, you can clean them correctly without dismantling them, with toothbrush (An indispensable tool of any jukebox's enthousiast!). If you desmantling them, pay attention to the notch of pin selector and in the direction of the washers. And stay zen, it's meticulous.
von - by
starskuch
-
Alles rund um Musikboxen
Hello Allen and Charly49,
If selector drum is brown/yellow=nicotine. Sometimes armature spring is black, it's because many dust is deposed (see picture: on left dirty, on right clean).
I agree with Charly49: many problems are possible, maybe on the same time! You must follow the manual sequence by sequence to eliminate problems one by one.
Without method you will search without finding.
von - by
starskuch
-
Alles rund um Musikboxen
Hello jukeboxe's enthusiats,
yes Allen and Charly49, restoration (or maintenance) is cleanning, cleanning and re-cleanning. Our jukeboxes are hold and dirty often.
Re-clean contacts of carriage and test them with multimeter. Then carriage reconnected, select a record and if pin selector move correctly:
1: carriage finds pin selector and stops: hurrah!, problem solved!
2: carriage does no
von - by
starskuch
-
Alles rund um Musikboxen
Hello geir,
if your conti is electrical (10 buttons letters and 20 numbers), you can push one letter + one number or one number + one letter, indefferently. The search unit must move when second button is pressed: when number pressed if you push one letter + one number, when letter pressed if you push one number + one letter,
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
1: You unscrew the 3 screws of the gripper motor, the motor goes down: the gripper arm is clear and you can move it slowly forward and backward.
2: in "home position" (gripper arm in magazin), switch n°1 (just right) is positionned in the cam groove.If is not the case, cam must be replace.
3: If you want it, you can slide the cam to the left (unscrew with allen wrech 3/32) and access
von - by
starskuch
-
Alles rund um Musikboxen
Hello Attaxi,
you must test all contacts with multimeter, cleaning is not enough.
If the selector pin move, connexion keyboard/ selector drum is correct.You must control if contacts of carriage are OK, follow the wires on the schematics, check with the multimeter. There's a track with contacts behind the drum selector: clean and check with the multimeter,If necessary adjust the slats so t
von - by
starskuch
-
Alles rund um Musikboxen
Hallo
this is an incredible work! "Bravo" ! This is a Graal for only lover of jukeboxs mechanics. I hope I have the same machine one day. Very, very congratulations to your work and passion, it's a pleasure to see your video.
Best regards.
von - by
starskuch
-
Alles rund um Musikboxen
Absolutly, I do to fast my message! 39 kiloOhms, that's correct.
Best regards.
Frank.
von - by
starskuch
-
Alles rund um Musikboxen
Gasp! A problem of sending. I said resistor colour is: gold, orange, white, orange=39 ohms. There's another error in the schematics: the filter capacitor have 4 capacitors, not 3 as in the schematics.
Best regards.
von - by
starskuch
-
Alles rund um Musikboxen
Hello from France,
i'm a new member of this forum. Happy propriaitaire of a Tempo 1 mono. Yes, it's an error of schematics; I send you a picture of my amplifier. Resistor was
von - by
starskuch
-
Alles rund um Musikboxen
1 / 1 1