Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 10 / 10
Hi Charly49,
Thanks for the help!
I tested the fuse, its ok!
any other ideas?
Unfortunately i can only check again on the week end
Regards James
von - by
james gold
-
Alles rund um Musikboxen
Hi, last time I posted on this forum I got some very good help with my Rowe Ami Ti2 its a couple of years back:
i have a MM6 that works and just needs cleaning internal and a few settings
I have (at the moment!) only 1 problem, when i press the button on the service control centre for credit nothing happens...... but it was working!
If i turn the credit unit by hand it works, and it lets me se
von - by
james gold
-
Alles rund um Musikboxen
hi Charley 49, Alan,
My appologies at getting back to zou only now!!!!
thanks for all the info regarding my amplifier problem from my ami ti2!!!
finaly got it fixed it was the problem with the 24v supply for the pre amp.
i found a guy approx 35kms away from me who has specialised in tube repairs he also replaced all my capacitors and i put in a new set of tubes. the poti was also broke
von - by
james gold
-
Alles rund um Musikboxen
hi Charley 49, Alan
the story so far
i have now corrected the volume control hook up and also measuring the voltage on the correct pins , but still not working
I have now focused on the power supply following the 2 brown leads that come from the transformer to the central terminal strip i measured 55v ac. The 2 diodes and one of the resistors are defiantly broken. There is also a zener
von - by
james gold
-
Alles rund um Musikboxen
hi Charley 49, Alan
the story so far
i have now corrected the volume control hook up and also measuring the voltage on the correct pins , but still not working
I have now focused on the power supply following the 2 brown leads that come from the transformer to the central terminal strip i measured 55v ac. The 2 diodes and one of the resistors are defiantly broken. There is also a zener
von - by
james gold
-
Alles rund um Musikboxen
Hi Charly49 and Alan
Over the weekend i made some progress but still not working
a, pre amp is R4372A board is R3788 but without an a or b
b, The cable that goes from the back plate poti to the amp has 5 wires but only the red and black are connected, pins 4 and 3
pin 7 is the earth or shield
c, The cable from the pre amp to the amp is ok.
d, there is defiantly no voltage from pin 1 and 8.
von - by
james gold
-
Alles rund um Musikboxen
Hi charly49,
thanks for the info,
on the socket for the preamplifier on the 50 watt amp will i always get a reading or only when a volume control is connected
the volume control on the back plate of the jukebox is a dual poti in my manual it only calls for a single.
i tried a single 10k poti as a remote control but i now realise i should have disconnected the dual poti wired up to the
von - by
james gold
-
Alles rund um Musikboxen
Hi all, First of all i wish all a great new year! and including health wealth and happiness!
I have been looking for a jukebox for a long time and finally decided to just do it, i have no previous knowledge of jukeboxes but i am an amateur musician and hi fi lover
I bought my first Jukebox an AMI Ti2 Woodbridge 2 weeks ago. it is not working and has a few problems and i am hoping that someone c
von - by
james gold
-
Alles rund um Musikboxen
1 / 1 1