Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 7 / 7
OK guys, I have now to replace the SCS, reference BRY20. On the internet I did not find any for sale so I have to find an equivalent, or a combination of transistors to re-create this component.
Any ideas ?
Thanks,
Claude
von - by
claude
-
Alles rund um Musikboxen
I have a double issue :
- taken separately, T1 is working and triggers the selection solenoid. Now, it does not receive any signal from the write-in trigger switch and the restart locking relay. So I will have to trace the +30V coming from there and above in the circuit.
- on the other hand, when seach contact on carriage is grounded as if a selection pin was detected, the SCS on LPI does n
von - by
claude
-
Alles rund um Musikboxen
Hi all,
My concern is now the memory system which is an electromechanic type, ie with movable pins.This system is the same as on the Prestige 160 BII and Consul 120 AII for which I have the manual thanks to the help of a member of the forum.
Extract :
The positioning motor moves the 12 selection solenoids behind the selection pins, back and forth and at the same time moves the wiper contac
von - by
claude
-
Alles rund um Musikboxen
In fact, after a closer examination of the memory bank, I noticed a small motor at the back of it, on the right side, I don't know what is its function and how to test it. I suspect I don't have a tormat but another type of memory system. It looks like all pins are recessed and nothing can be detected by the contacts on the carriage. Maybe when a record selection is done, one or several
von - by
claude
-
Alles rund um Musikboxen
Charly,
Thanks for the trick, exactly what I want to do. Trouble is I don't know where is the pulse cable, there is no such connection to the control center, only two cables going inside as seen in first picture.
Shall I try the smaller cable ended with the black connector ?
Best Regards,
Claude
von - by
claude
-
Alles rund um Musikboxen
Hello jukebox experts !
I have an isue with my NSM HIT 120A. It was perfectly working after a carriage restoration. Yesterday I started it on again, and after a record select, it just made a scan and returned in docking position as if no memory was recorded. I don't know if the write-in or read-out system is faulty. Is there a way to switch all memory magnets to YES state in order to narrow
von - by
claude
-
Alles rund um Musikboxen
1 / 1 1