Zeige alle Beiträge eines Teilnehmers
1 / 1 1
Ergebnisse 1 - 10 / 10
Disappointment ...
The latch solenoid now moves freely,
I made a new puffer out of cork to replace the gluey old rubber one,
but ...
The Credit Unit does not operate the latch solenoid ...
So : more work ahead !
von - by
jd
-
Alles rund um Musikboxen
As mentioned above :
The TL's are connected to 115V, the trafo on them is for 115V, but the starters are for 220 V.
At least, that is what is mentioned on them.
But they are "Philips S2" : they are meant for use with 2 lamps in series, which means that they are meant to operate between 100-150 Volt.
(see : :
REF: ST-S2 : 4-22W SINGLE@110V SERIES@240V - S2 STARTER )
That sh
von - by
jd
-
Alles rund um Musikboxen
I got the top unit out, once you know how, it is rather straightforward.
The molex plugs however are not all that easy to come by, to detach them.
There is a large solenoid visible now, which must surely be the latch solenoid.
I was immovable, seemed to be welded to a support plate.
The welding eventually appeared to be a rubber buffer that degraded to some kind of powerful glue.
Some ge
von - by
jd
-
Alles rund um Musikboxen
Good, actions and progress so far :
I checked the TL's.
They are connected to 115V, the trafo on them is for 115V, but the starters are for 220 V.
I can now choose : new ballasts for 220V (readily obtainable, I may even have some lying about), or buy 115V starters.
I prefer the latter, leaving the jukebox as original as possible.
I removed the coin acceptor, behind it is a small app
von - by
jd
-
Alles rund um Musikboxen
Hi Charly 49,
You are really helping me out !
Having no electrical background, this "sequence of operation" was rather puzzling to me.
It now may even have become understandable !
Thanks !
I will try to spend a few hours with (or half inside) the MM6 in the weekend.
Regards,
Jan
von - by
jd
-
Alles rund um Musikboxen
Hi Charly 49,
Thanks for your help !
So, if I understand well, if I can energize the latch solenoid, there is a chance I can play records.
The next question therefore is : what voltage does it need (how much, AC or DC).
If powering the latch solenoid directly off the power supply has some effect, then I can try energizing the R1 relay.
Again : what voltage does it need (how much, AC or
von - by
jd
-
Alles rund um Musikboxen
Hi Alan,
You apparently have in-depth knowledge of the MM6.
I have to learn everything ...
Would it be possible to give me step-by-step assistance to bring back all functions ?
Current situation :
- coins are correctly accepted or rejected
- but without any noticeable effect
- turning the spider-like thing under the clear plastic cover (attached high up on the left wall) results in l
von - by
jd
-
Alles rund um Musikboxen
Hi Alan,
So, if I understand well :
On the power supplu :
30V DC between 1 and 3
30V AC between 2 and 3
6V AC between 5 and 6
I will measure that tomorrow.
(not at home now)
And on the mechanism molex plug I then have :
where are the voltages to be found then ? Pin 3 Black is ground ?
I will also make a few photographs tomorrow.
Regards,
Jan
von - by
jd
-
Alles rund um Musikboxen
Hi Alan,
That is good news for me !
Somebody (apparently) who can rescue me ! (or my jukebox)
In the meantime, I did the following :
1. I did not quite trust the 220V to 115V transformer :
there must be a reason for the failure of the original AMI-ROWE 115V transformer.
So I replaced it by one I had lying about somewhere.
2. I found a transformer (the whole power supply) for an MM1
von - by
jd
-
Alles rund um Musikboxen
Hallo Jukebox Freunde,
Letztendlich habe Ich Platz fuer einen Jukebox,
und habe auch einen gefunden : Rowe AMI MM6 Boubon Street.
225 Euro : ist das OK ?
Leider ist der erste Trafo (vom Junction Box) kaputt.
Habe Ich irgendwo gefunden (hoffe Ich), sollte in der Post sein.
Mittlerweile kupple Ich etwas aus Aluminium, mit viel Drahten, ab,
ein Remote Volume Control oder so wass.
Und
von - by
jd
-
Alles rund um Musikboxen
1 / 1 1