OMT CD 50 WURLITZER – please help
It does not respond after switching on. No movement of the mechanism. The number 8 flashes on the display. After pressing the switch K7, the number 8 stops flashing. The display starts with the numbers 0000. I enter the desired number of the CD and the song with the buttons = no movement of the mechanism, nothing.
Tested in service mode:
1- The coin mechanism works well, the credit is added after inserting the coin
2- Cd control – the test works well, the CD starts via manual start with the buttons on the CD control board, the CD starts, the music plays.
3- SELECTION CREDIT COMPUTER board – switch to service ON + switch switched to gripper motor to ON – press the LT button on the SELECTION CREDIT COMPUTER board = the mechanism takes out the CD and puts it in the player = the hand works – it only puts it in and after a while returns the CD back to the magazine. The magazine does not rotate, always the same position.
4- CD tray motor works when manually released – tray spins. Manual release only
video :
[
www.youtube.com]
manuál test
[
www.youtube.com]
